Anoop Purushothaman, Online Resume

Anoop Purushothaman  QA/QC PIPING INSPECTOR                   (CSWIP 3.1/ASNT NDT LEVEL II)
[email protected] 
+91 8714820722 
Alappuzha, India 
1991/03/14 
India 
X3697898 
Married 
International 
Male 
linkedin.com/in/anoop-purushothaman-744a11291 

Profile

Mechanical Engineering professional holding 11 years of Experience in QA/QC Engineer (Mechanical, Piping, Welding). I have proven track record of performing in challenging projects and situations. I have utilized the Engineering skills and expertise along the way to achieve the objectives, being actively involved in conflict management and stakeholder communications. I had built exceptional and lasting relationships with clientand colleagues across functions at all levels. A consistent track record of completing projects from the concept and detail of the design through to implementation, testing and handover Responsible for ensuring that quality of the works being delivered by the project team compiles with project quality plan, procedures and instructions.

Professional Experience

2024/10 – presentRuwais, Abu Dhabi

Nasser S. Al-Hajri Corporation

QA/QC PIPING INSPECTOR

            Borouge, a joint venture between ADNOC and Borealis, is expanding its innovative polyolefin solutions with the launch of its second Cross-Linkable Polyethylene (XLPE) production unit, XLPE 2. This project enhances Borouge’s capacity to meet rising global demand for durable, thermally resistant, and electrically insulating polyethylene, vital for power cables and advanced energy applications. XLPE-2 underscores Borouge’s commitment to delivering sustainable, efficient solutions across industries, supporting global energy transition, and driving regional economic growth.

2022/01 – 2024/01Ras Laffan, Qatar

Aljaber Engineering W.L.L (North Field South - Early Site Work)

QA/QC ENGINEER MECHANICAL (Welding, Piping, NDT)

•Review/verification of drawings, material certificates, test certificates.

•Preparation for the method statements & scope of work and development of the Project Quality Plans & Procedures, coordinating Project Manager and Preparing Quality Control Plans.

•Carrying out review of necessary Project Documents to fulfill the Specifications and Clients Requirements before assign new project for Fabrication and Erection. Involved in the preparation of ITP/method statement for piping, insulation, painting. Witness/review the activities as per inspection/test plan.

•Ensuring that the preparation of Welding Procedure Specification (WPS), Procedure Qualification Record (PQR), Welding personnel (WPQ) records meets the specification and code requirements.

1 / 5

•Monitoring that the Incoming Material, Fabricated Items, Fittings’ & Valves are meeting the requirements of specification and relevant codes. Review of fabrication procedures, NDT Procedures, Testing Procedures and compliance with Specification & Code Requirements. Pre Inspection, In Process Inspection and review of inspection reports to ensure the work performs as per requirements.

•Ensure that Qualified Welders, WPS & PQR are used to perform tasks and NDT(UT, RT & MPI) requirements are fulfilled as per ITP.

•Preparation for the method statements & scope of work and development of the Project Quality Plans & Procedures, coordinating Project Manager and Preparing Quality Control Plans.

•Carrying out review of necessary Project Documents to fulfill the Specifications and Clients Requirements before assign new project for Fabrication and Erection. Involved in the preparation of ITP/method statement for piping, insulation, painting. Witness/review the activities as per inspection/test plan

•Ensuring that the preparation of Welding Procedure Specification (WPS), Procedure Qualification Record (PQR), Welding personnel (WPQ) records meets the specification and code requirements.

•Monitoring that the Incoming Material, Fabricated Items, Fittings’ & Valves are meeting the requirements of specification and relevant codes. Review of fabrication procedures, NDT Procedures, Testing Procedures and compliance with Specification & Code Requirements. Pre Inspection, In Process Inspection and review of inspection reports to ensure the work performs as per requirements.

•Conducting Process Audit & Supplier Quality Audit to ensure the client Quality requirements are complied with codes and standards. Route Cause Analysis for Non Conformance. Review of RT films, witness of NDT testing like PWHT, and MPT. Verification of execution of Process Piping by mean of Line walk for piping as per P&ID.

•Smooth interface with client on all Quality aspects of the project. resolving any  Quality related problems during project work. Efficiently handling all Documentation- Preparation/Verification of Test Packages as per code Requirements. Inspection based on QP Spec, API, ASME, BS, ISO etc.

•Monitoring of quality parameter as approved WPS/PQR, Inspection test plan during execution of job.

•Conducting qualification of welders and maintaining their continuity records.

•Receiving and Reviewing piping isometrics, support drawings and details; Interpreting the Drawings, codes, Standards and Documents (Information regarding what, when, where and how the inspection is to be performed.

•.Check incoming material like pipe/plate and welding consumable certificates, storage and conditions.

•Inspecting Material specifications based on the Isometric Drawing specification, verifying whether the joint fit-ups are prepared according to approved procedures. Witnessing of fit –up.

•Check the correct pre-welding and In-process distortion control.

•.Monitoring of welding activities of sub-contractors piping and welding work.

•Carry out visual inspection of the weld joint.

•Preparation of NDT request and co-ordination with NDT sub-contractor.

•Confirm repairs, re-testing and re-inspection in accordance with specifications.

•Monitor Post weld heat treatment (Heating method & temperature record system).

•Review of weld summary and clearing of test packages for Hydro Testing.

2 / 5

•Witnessing Hydro testing,Co-ordination, Request for Client Inspection at stages.

•Preparation of punch-list after line walkthrough with client and verification of punch- list completion.

•Logging of Non-conformities reports and controlling it with the proper Corrective / preventive actions to rectify it.

•Familiar with welding processes SMAW, GTAW, and SAW, Thorough knowledge in application of various DT and NDT Methods.

•Coordination with Client/its Representative /Third party inspectorate / ASME Authorized inspector / Suppliers for inspection requirements of the project and Submission of all inspection reports and to all related documents to the QC department.

2018/05 – 2021/12Doha, Qatar

Arabian Technical Services Co. (Development of ISF Camp at Duhail Preliminary Phase Work)

QA/QC ENGINEER MECHANICAL(WELDING,PIPING,NDT)

•Witness and inspection both fabrication and site activities ensuring that project specifications are built to requirements.

•Conduct daily inspection, monitoring and surveillance activities both fabrication and site which involves safety, piping activities, material and equipment preservation, proper implementation of approved welding procedures and specification is being carried out to jobsite.

•Conduct daily inspection for lay out and cutting, fit-up, material inspection, dimensional, spool release activities prior to painting.

•Monitoring and managing site work progress according to the work schedule.

•Inspection of pipe, spool as per isometric drawing

•Coordinate with material department and warehouse and witness material receiving inspection and prepare damage reports if any.

•Verify and inspect the fittings, gasket, valves and flange as per specification and bill of materials.

•Verify alignment of piping connections, fit up etc

•Line check prior to hydrotest to verify the entire work in the test limits has been completed as per isometric and project quality control procedure specification and standards.

•Monitor and inspect nuts and bolts as per bill of materials and correct size and type, and all the pipe and pipe support installed according to approved drawing and specifications.

•Coordinate to NDT subcontractor regarding RT joint, MT/PT joint, UT joint and PWHT joint. Witness hardness test execution, positive material inspection, penetrant test and magnetic particle inspection.

•Review and conduct line check inspection to ensure it comply both Engineering and Quality requirements, prepare punch list, punch list clearing on test package issued to subcontractor prior to release for testing.

•Witness and inspection hydro testing and pneumatic test inspection to ensure that all requirements are meet the project specification standards.

•Witness and inspection reinstatement and close out activities of piping systems after completion of test as per approved drawings, specification and commissioning requirements.

•Witness and inspection reinstatement and close out activities of piping systems after completion of test as per approved drawings, specification and commissioning requirements. Conduct final inspection for system mechanical completion certificate (SMCC) for system completeness and prepare punch list for those did not comply with company requirement and final verification upon correction for final approval.

3 / 5

2013/07 – 2018/03Mumbai, India

H'Reck Engineers Pvt Ltd,

QA/QC ENGINEER MECHANICAL (PIPING,WELDING,NDT)

•Review the QC documents such as procedures, method of statement, Inspection test plan and etc

•Participating in project kick-off, pre inspection and project quality meetings. Reviewing of the subcontractor documents and monitor their performance.

•Reviewing of material test certificates as per specifications

•Reviewing of WPS and witnessing WPQ test and welder performance qualifications as per procedure & project specifications.

•Co-ordinate a team of QC Inspectors.

•Supporting the site construction team in day to day quality requirements

•Maintaining ongoing production welding.

•Preparation and qualification of welding procedure in accordance with AWS,ASME Codes.

•Witness the procedures/welders qualification tests, mechanical tests as required,Interpretation and evaluation of NDT (RT,MT,PT,UT)reports.

•Monitoring the weld repair rate and find out the remedy, Interpretation of RT films , issuing repair instruction and follow up the same.

•To Maintain weld procedure and welder qualification registers.

•Quality Checking of diff.grades Pipes, Fittings, Flanges etc. as per Project Specifications & Codes RWitnessing MPI, PT & UT of welded Joints.eviewed the Test Certificates.

•Checking of Fit-Up as Per ISOMETRIC Drawing,Preparing Daily welding inspection reports, Welding inspection reports, Weld History Sheets & Evaluate % of repair & penalty records.

•Inspection of pipe lines materials like Carbon steel, stainless steel, Duplex s.s.

•Witnessing PMI, PWHT & Hardness Testing.

•Maintain the Calibration records of diff.equipments.

•Preparing Hydro test Packages for Piping & witnessed the same.

•Preparing Punch list & follow up.

•Preparation of as built drawings.

•Preparations of Project Quality Control plan & work instructions.

•Inspection of Blasting & Painting on fabricated spools & structures as per Project specifications.

Education

2014Kerala, India

TECHSHORE INSPECTION SERVICE

ASNT LEVEL –ll RT, MT, PT & UT

2014Kerala, India

TECHSHORE INSPECTION SERVICE

QUALITY CONTROL IN WELDING INSPECTION & PIPING AND PIPELINE ENGINEERING

2009 – 2013Namakkal,Tamilnadu, India

SRG COLLEGE OF ENGINEERING / ANNA UNIVERSITY-CHENNAI

BE- MECHANICAL ENGINEERING

2009Padanilam, India

PHSS

HSE / Science

2006Edappon, India

EHSS

SSLC

2014Kerala, India

TWI Certification, UK

CSWIP 3.1 WELDING INSPECTOR (Certified Scheme for Welding Inspector Personal level-II) Welding Inspector

4 / 5

Skills

Well knowledge& Handling in MS OFFICE
Well Handling with WINDOWS-OS

Declaration

I do here by declare that the above mentioned details are true to best of my knowledge and belief.

Anoop Purushothaman

5 / 5